Table of Contents
Advertisement
46 electrolux
Clean operating screen and housing
Do not use furniture cleaners or aggressive cleaning agents to clean the
machine.
Use a damp cloth to wipe down the operating screen and housing.
What to do if ...
Troubleshooting by yourself
If, during operation, the warning message appears on the LCD follow strictly guides
included in the massage on the display. If you are not able to solve the problem
Problem
Dryer does not work.
Pro Steam programme
does not start. Message
on the display: The steam
water tank is empty.
Please fill it and then press
START.
After a Pro Steam pro-
gramme, garments are
not sufficiently smooth.
Possible cause
Mains plug is not plugged
in or fuse is not working
correctly.
Loading door is open.
Have you pressed the
START PAUSE button?
Water tank is empty.
Recirculation valve is
closed (OFF position)
Wrong programme selec-
ted (e.g. SYNTHETICS
Mischegewebe) (instead
of COTTON(Baumwolle)).
Too low a steam level set. Set a higher steam level.
Too many garments in
machine, or garments
that are too different.
Remedy
Plug in at mains socket.
Check fuse in fuse box
(domestic installation).
Close loading door.
Press the START PAUSE
button again.
Fill water tank.
Turn the recirculation
valve to ON position.
Note the composition of
the fabric.
Load the machine with
fewer garments, or only
similar ones.
Advertisement
Table of Contents
