Electrolux TK SL5 E User Manual page 19

Pro steam condenser dryer
Hide thumbs Also See for TK SL5 E:
Table of Contents

Advertisement

Fill with distilled water from the canister provided, up to the MAX mark inside the
container.
Push filler neck and drawer with condensed water container back in.
When dry, all textiles not specifically prohibited in the chapter 'Sorting and
preparing laundry' may be treated with the Pro Steam System. Wet textiles
may only be treated if they are labelled as suitable for dry programmes.
Water recirculation system
This system allows you to use for a Pro Steam cycle automatically the condensed
water collected in the condense water tank during a drying cycle.
The water in the condense water tank will never automatically fill the steam
water tank.
The water recirculation system works only if it is supplied by water arising
during standard drying cycles.
To activate this system turn the valve in ON position. When the valve is ON the steam
water tank will be filled during the next drying cycle. Water will be supplied by the
water circuit directly to the steam water tank filling it automatically.
To activate recirculation set valve in ON position. To do that:
1.
1
2
ON
Pull drawer containing condensed water container out a little. Behind the drawer
there are two elements:
1
steam water inlet - for manual refilling of steam water container.
2
water recirculation system valve/filter.
OFF
electrolux 19

Advertisement

Table of Contents
loading

Table of Contents