Electrolux TK SL5 E User Manual page 26

26 electrolux
If the STEAM LEVEL (Dampfmenge) button is not pressed after a Pro Steam pro-
gramme is selected, the medium steam level (MED) is selected automatically. If you
select a REFRESH programme, MIN is selected automatically.
If in doubt, always select a lower steam level first until you have more ex-
perience with load volumes, fabric types and the corresponding optimum
steam level. If too high steam level is selected, garments may lose their
shape. If too low steam level is selected, creases may remain.
Selecting additional options
The additional options available for the Pro Steam programmes are LONG ANTI-
CREASE, BUZZER, SPIN SPEED
1. By turning the knob choose a Pro Steam programme.
2. To set the option press OPTION button. you will see available options on the
screen.
3. Press repeatedly OPTION button to select proper option. Selection is marked
by rectangular border.
4. Press OK button to activate it. Suitable icon should appear on the right side of
the screen.
To deselect an option follow the same steps. Option icon should disappear.
LONG ANTI-CREASE
A 90 minute anti-crease phase is set. The display now shows the long anti-crease
icon. If this additional option is selected, the anti-crease phase (30 min.) at the
end of the Pro Steam cycle is lengthened by 60 minutes. The laundry can be re-
moved at any time during the anti-crease phase.
BUZZER
The appliance is supplied with the BUZZER function deactivated. The button is used
to switch the function on or off. When the function is active, the BUZZER symbol
appears in the display.
The buzzer sounds or plays a tune during:
– cycle end
– anti-crease phase and when phase starts or ends
1) available with cotton/easy care and cotton/synthetic shirts programmes
1)
and the CHILD LOCK.