Electrolux TK SL5 E User Manual page 37

electrolux 37
It is normal for the appliance to make noises during drying programme if
garments with hard parts, such as metal buttons, are put in the drum.
Changing a programme
To change a programme which has been selected by mistake once the programme
has started, first turn the programme selector to OFF and then reset the programme.
The programme can no longer be changed directly once the programme
has started. If you nevertheless attempt to change the programme with the
programme knob the following message is shown:
Please turn programme selector to the last used position.
The drying programme is not however affected by this.
Putting in extra items or taking items out before end of programme
1. Open loading door.
Laundry and drum can become hot. Risk of burns!
2. Load or remove laundry items.
3. Close loading securely. Lock must audibly lock.
4. Press the START PAUSE button to continue the drying cycle.
Drying programme complete / removing laundry
After the drying cycle is completed , 0:00 starts flashing and alternatively the
messages: Finished. Please remove the laundry and Anti-crease appear in the dis-
play. If the buzzer has been activated, an audible signal sounds at regular intervals.
The drying programme is automatically followed by an anti-crease phase,
including brief steam phases, which lasts around 30 minutes.
The drum rotates during the anti-crease phase. This keeps the laundry
loose and free of creases. It can be removed at any time during the anti-
crease phase. Laundry should be removed as quickly as possible to prevent
creases from forming.