Continue With The Rack Installation Process - HP D7171A - NetServer - LPr Installation Manual

Chapter 2
Chassis
Nuts
3. Extend the HP NetServer out of the rack to ensure the Cable Management
Arm moves along with the chassis without binding.
NOTE Refer to the HP NetServer LT 6000r Cabling Reference
Guide, for information about cable dressing and routing.
4. If the Cable Management Arm moves with the chassis and the rack
installation appears to be successful, slide the HP NetServer into the rack.
5. If the HP NetServer is not in a restricted-access area, use the lock to
secure the bezel.
6. Plug the HP NetServer's power cable and all available data cables into the
back of the HP NetServer.

Continue with the Rack Installation Process

After you install the HP NetServer in the rack, refer to the Rack Installation
Road Map to continue with the process of installing and configuring your
HP rack system.
Prepare the HP NetServer for Rack Mounting
Attach the Cable Management Arm
Chassis
Bracket
13