Control By The Computer - Sanyo XU88 - PLC XGA LCD Projector Owner's Manual

Chapter 8 Network capture functions

[1] Control by the computer

* PC provides the Network Capture.
PC1
PC3
Select input mode to "Network" previously.
1
Start up Network Capture 4.
2
Select the projector(s) listed on the projector list on the application window and click Start real time
capture. The application window will disappear and then the screen image of the computer will ap-
pear on the projected screen in real time.
* You can select multiple projectors (up to 5) on the projector list.
• To stop capturing, click One-shot on the popup menu appearing by clicking on the Network
Capture 4 icon on the task bar. The captured image of the computer on the screen is frozen.
• To restart capturing, click Capture start on the popup menu.
3
To end capturing, click End real time capture on the popup menu appeared by clicking on the Network
Capture 4 icon on the task bar.
✐ When you capture the screen image of the movie player software with the real time capture function, the
projector may not be able to reproduce the sound. In that case, start up the Network Capture 4 software
first and then start up the movie player software.
✐ If the error message appears, check the item "Parameter set up" (+ p.88).
✐ The sound output from the projector can be controlled with the volume slider and mute item on the
application window of the Network Capture 4 software (+ p.24, p.86).
90
PC2
Project this screen PC2
image with PJ2.
Capture
PC4
PC5
One-shot capture
Terminate Capture
Window show..
Version information..
Shut down
PJ2
PJ1
PC6
* Start capturing from
the PC1.