Control By The Computer - Sanyo PLCXL51 Owner's Manual

Chapter 8 Network capture functions

[1] Control by the computer

* PC provides the Network Capture.
PC1
PC3
Select input mode to "Network" previously.
1
Start up Network Capture 5.
2
Select the projector(s) listed on the projector list on the application window and click Start real time
capture. The application window will disappear and then the screen image of the computer will
appear on the projected screen in real time.
* You can select multiple projectors (up to 5) on the projector list.
• To stop capturing, click One-shot capture on the popup menu appearing by clicking on the Network
Capture 5 icon on the task bar. The captured image of the computer on the screen is frozen.
• To restart capturing, click Start real time capture on the popup menu.
3
To end capturing, click Terminate capture on the popup menu appeared by clicking on the Network
Capture 5 icon on the task bar.
✐ If the error message appears, check the item "Parameter set up" (+ p.88).
✐ The sound output from the projector can be controlled with the volume slider and mute item on the application
window of the Network Capture 5 software (+ p.24, p.86).
90
PC2
Project this screen PC2
image with PJ2.
Capture
PC4
PC5
One-shot capture
Terminate Capture
Window show..
Version information..
Shut down
PJ2
PJ1
PC6
* Start capturing from the
PC1.