Register The Projector; Confirmation Of Registered Projector - Sanyo XU88 - PLC XGA LCD Projector Owner's Manual

Register the projector

To use the multi control function, register the IP address of the projector you intend to control. Click PJ
registration sub menu tab and set the IP address, Memo and Multi control item, then click Set button.

Confirmation of registered projector

To check the registered information, click Check & Change sub
menu tab. The registered information of the projector is listed as
the below.
* The word "none" is displayed if the "Memo" function is used.
Page no.
✐ 10 projectors can be registered per page and up to 100 sets can be registered for the multi-control.
Items
IP address .................Enter IP address of the projector to control
Memo.........................Enter projector name or installed location etc.
Multi control item
Control ................. Controlling the projector
Both control .............. Controlling and displaying images
Visual control ............ Displaying the images
IP address
Status
Memo
Description
* When you click on a listed IP address,
the login page for the selected pro-
jector will be displayed with a new
window.
Click here to close
the sub menu Check
& Change.
Multi-control
81