Sanyo XU88 - PLC XGA LCD Projector Owner's Manual page 58

Chapter 6 Basic setting and operation
● When PJ lamp replacement time is reached:
TITLE: Message from projector
10-03-2007 00:59
Projector Model Name: model name
TCP/IP: 192.168.1.201 Projector Name: Proj05
It sends you following message.
*The PJ lamp replace time is reached.
✐ Replace it with a new lamp immediately and reset the lamp counter. If the projector is used
without resetting the lamp counter, the alert mail is sent to users in every power-on of the pro-
jector. This alert mail will not be sent when the mail sending condition "When the life span of
lamp is reached" is unchecked.
● When lamp corres. value reaches preselect use time:
TITLE: Message from projector
10-03-2007 00:59
Projector Model Name: model name
TCP/IP: 192.168.1.201 Projector Name: Proj05
It sends you following message.
*The accumulated lamp use time reaches 1800 hours.
Prepare for the lamp replacement.
✐ The projector sends a free message when the lamp use time (Corresponding value) reaches
the preselected lamp use time. It can be used for preparation of the lamp replacement and the
maintenance required.
58
Discretional messages