Check The Timer Events; Change The Event Mode - Sanyo XU88 - PLC XGA LCD Projector Owner's Manual

Instruction manual, plc-xu88 network set up
Hide thumbs Also See for XU88 - PLC XGA LCD Projector:
Table of Contents

Advertisement

2
Set an execute time
Type the time with (Hour:Minute) and 24 hours format.
Ex.: Type [18:25] if you specify [PM 6 o'clock and 25 minutes].
3
Select an event action
Select an event action from the pull-down menu.
Event
ON .................................. Turns on the projector
OFF ................................ Turns off the projector
Lamp Auto .................. Changes lamp mode to "Auto"
Lamp High .................. Changes lamp mode to "High"
Lamp Normal ............. Changes lamp mode to "Normal"
Lamp Eco ..................... Changes lamp mode to "Eco"
4
Register an event
Click Set button to register the set timer event. Repeat steps 1 to 4 for another timer event setting.

Check the timer events

To check the set timer events, click
events are listed. The event with blue background color rep-
resents the timer-OFF event.

Change the event mode

On the event list appearing by clicking Check button, click on the
event you want to delete, disable or enable. Click Cancel, Delete,
Timer ON or Timer OFF button on the popup pallet.
Button
Cancel ........................Cancels the setting
Delete ........................Deletes the timer event
Timer OFF .................Disable the timer event temporarily
Timer ON...................Enable the timer event
Action
Check
Operation
button. The timer
Timer setting
75

Advertisement

Table of Contents
loading

This manual is also suitable for:

Plc-wxu30a - 3700 lumensXu88

Table of Contents