Using The Real Time Capture - Sanyo XU88 - PLC XGA LCD Projector Owner's Manual

Using the Real Time Capture

This is a function to project the screen image and reproduce the sound of the computer by the projec-
tor in real time. The captured image projected by the projector can be selected from the computer, web
browser and the projector respectively.
Registering the computers
Up to 30 computers can be registered.
1
Access to the control page of the projector by using the web
browser. From the Network menu, click Capture tab to display
the setting page.
2
Switch to Connection Setting page by clicking the page num-
ber tab [3]. Enter the IP address of the computer to the PC num-
ber, and then click Set button. Click Set button to register the IP
address for each page.
✐ The registered computer enables to start capturing if only the Network Capture 4 is activated.
✐ The transfer speed of the captured image using the Real Time Capture function is depending on the net-
work environment and data volume of the image. It cannot be supported for movie pictures.
Using the Real Time Capture
89