Problem Statements - Xerox 700 User Manual

Problem Solving

Problem Statements

Problem
Message will not clear
8.5" x 11" original was not
enlarged onto an 11" x 17" page
Deformed transparencies
Output does not reflect the
selections made
Output is not stacked correctly
The machine will not power ON
8-22
Corrective Action
- If the fault is a paper jam, ensure that any
paper is removed from the appropriate area
and that there are no hidden or small pieces of
paper left behind.
- Reboot your machine by powering OFF and
ON using the On/Off button at the front of your
machine.
- Select a percentage for enlargement, or select
the required paper tray and Auto %
reduce/enlarge.
- Check to see if Transparencies are selected
on the Paper Type screen. The machine
automatically adjusts for different types of
media, paper can tolerate more heat than
transparencies.
- Select the Save button, if appropriate, after
each selection on the touch screen.
- Check to see if the paper tray guides are
locked into position against the paper.
- Check the power cord installation.
- Firmly press the ON/OFF button.
- Check to see if the AC outlet is receiving
voltage. (Connect another appliance to the
outlet to verify voltage.)
Xerox 700 Digital Color Press User Guide