Product Statements - Xerox B230 Reference Manual

Product Statements

CAUTION—POTENTIAL INJURY:
power cord to an appropriately rated and properly grounded electrical outlet that is near the
product and easily accessible.
CAUTION—POTENTIAL INJURY:
power cord provided with this product or the manufacturer authorized replacement.
CAUTION—POTENTIAL INJURY:
power strips, multi-outlet extenders, or UPS devices. The power capacity of these types of
accessories can be easily overloaded by a laser printer and may result in a risk of fire, property
damage, or poor printer performance.
CAUTION—POTENTIAL INJURY:
use of a surge protection device may result in a risk of fire, property damage, or poor printer
performance.
CAUTION—SHOCK HAZARD:
product near water or wet locations.
CAUTION—SHOCK HAZARD:
make any electrical or cabling connections, such as the power cord, fax feature, or telephone,
during a lightning storm.
CAUTION—POTENTIAL INJURY:
power cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord
between objects such as furniture and walls. If any of these things happen, a risk of fire or
electrical shock results. Inspect the power cord regularly for signs of such problems. Remove the
power cord from the electrical outlet before inspecting it.
CAUTION—SHOCK HAZARD:
connections, such as Ethernet and telephone system connections, are properly installed in their
marked plug-in ports.
CAUTION—SHOCK HAZARD:
controller board or installing optional hardware or memory devices sometime after setting up
the printer, then turn the printer off, and unplug the power cord from the electrical outlet
before continuing. If you have any other devices attached to the printer, then turn them off as
well, and unplug any cables going into the printer.
CAUTION—SHOCK HAZARD:
of the printer, unplug the power cord from the electrical outlet and disconnect all cables from
the printer before proceeding.
CAUTION—POTENTIAL INJURY:
require two or more people to lift it safely.
To avoid the risk of fire or electrical shock, connect the
To avoid the risk of fire or electrical shock, use only the
Do not use this product with extension cords, multi-outlet
Do not use this product with an inline surge protector. The
To avoid the risk of electrical shock, do not place or use this
To avoid the risk of electrical shock, do not set up this product or
Do not cut, twist, bind, crush, or place heavy objects on the
To avoid the risk of electrical shock, make sure that all external
To avoid the risk of electrical shock, if you are accessing the
To avoid the risk of electrical shock when cleaning the exterior
If the printer weight is greater than 20kg (44lb), then it may
Safety, Regulatory, Recycling, and Disposal Reference Guide
Safety
Xerox B230 Printer
®
7