Xerox 700 User Manual page 215

HCS Top Tray Jam (E7)
HCS Exit Jam (E8)
Xerox 700 Digital Color Press User Guide
Perform the following steps to clear the HCS Top
Tray jam and resume printing.
Open the HCS Front Cover.
1.
Follow the instructions located inside the Front
Cover to clear the E1, E2, or E3 jam.
2. Remove the jammed paper from the Top Tray.
Close the HCS Front Cover.
3.
If the UI indicates there is a jam in the digital press,
4.
follow the instructions on the screen to remove any
paper in the area indicates. Refer to the Jam
Clearance section in the Problem Solving chapter in
this manual.
Follow the instructions displayed on the digital press
5.
UI to resume printing.
Perform the following steps to clear the HCS Exit
jam and resume printing.
Open the HCS Front Cover.
1.
Follow the instructions located inside the Front
Cover to clear the E8 jam.
Lift the green handle and/or rotate the green knob
2.
and remove all paper in the exit area.
Close the HCS Front Cover.
3.
If the UI indicates there is a jam in the digital press,
4.
follow the instructions on the screen to remove any
paper in the area indicates. Refer to the Jam
Clearance section in the Problem Solving chapter in
this manual.
Follow the instructions displayed on the digital press
5.
UI to resume printing.
Accessories
10-7