Jam Clearance - Xerox 700 User Manual

Accessories

Jam clearance

10-6
If a jam occurs, the machine stops printing and a message is
displayed on the User Interface (UI). Follow all instructions
displayed completely and in the sequence shown.
HCS Entrance Jams (E1, E2, and E3)
Perform the following steps to clear the HCS Entrance jam and
resume printing.
Open the HCS Front Cover.
1.
Follow the instructions located inside the Front Cover to
clear the E1, E2, or E3 jam.
Lift the green handle and/or rotate the green knob and
2.
remove all paper in the entrance area.
Close the green handle.
3.
4.
Close the HCS Front Cover.
If the UI indicates there is a jam in the digital press, follow
5.
the instructions on the screen to remove any paper in the
area indicates. Refer to the Jam Clearance section in the
Problem Solving chapter in this manual.
Follow the instructions displayed on the digital press UI to
6.
resume printing.
HCS Transport Jams (E4, E5, and E6)
Perform the following steps to clear the HCS Transport jam and
resume printing.
1.
Open the HCS Front Cover.
Follow the instructions located inside the Front Cover to
clear the E4, E5, or E6 jam.
Lift the green handle and/or rotate the green knob and
2.
remove all paper in the transport area.
Close the green handle.
3.
Close the HCS Front Cover.
4.
If the UI indicates there is a jam in the digital press, follow
5.
the instructions on the screen to remove any paper in the
area indicates. Refer to the Jam Clearance section in the
Problem Solving chapter in this manual.
Follow the instructions displayed on the digital press UI to
6.
resume printing.
Xerox 700 Digital Color Press User Guide