Xerox 700 User Manual page 90

Copy
Services Job Status Machine Status
Interrupt
Log In/Out
Start
Language
Dial Pause
Copy
Quantity 0 / 1
Originals 1
Black
94%
Collated
Chapter Start... Insert
Change
Separators...
Settings
Copy
0 / 1
Quantity
Originals 1
Black
94%
Collated
Chapter Start... Insert
Change
Separators...
Settings
4-48
Program the job requirements for the first
Energy Saver
segment of the job. Load only the first
Clear All
segment into the document handler or place
Stop
the segment on the glass one page at a time.
Press the Start button on the keypad.
When the first segment has finished scanning,
the Copy Status screen will appear. Remove
the originals and press the Change Settings
Cancel
button. Program the job requirements for the
Last Original
second segment of the job. Load the second
segment into the document handler or on the
Next Original
document glass and press the Start button on
Start
the control panel. Repeat these steps until all
segments of your job have been programed
Change Sample Set
Quantity...
and scanned.
After the last segment has been scanned,
touch the Last Original button on the touch
screen to end the build job.
Cancel
Last Original
Select the Last Original button to continue.
Next Original
Start
Change Sample Set
Quantity...
The machine will complete the quantity
selected.
You have completed the description of Build
Job.
Xerox 700 Digital Color Press User Guide