High Capacity Feeder - Xerox 700 User Manual

High Capacity Feeder

Xerox 700 Digital Color Press User Guide
The High Capacity Feeder is primarily
intended for use as a large quantity feeder
and accommodates stock from Executive
(7.25" x 10.5") LEF to 8.5" x 11" LEF.
The High Capacity Feeder can hold paper
of weights between 64 gsm to 220 gsm,
and can hold a maximum of 2000 sheets of
80 gsm paper.
Stock can only be loaded long edge feed.
After stock is loaded into the High Capacity
Feeder, a pop-up window may appear
asking you to change or confirm the type
and size of the stock. The tray may not be
ready for use until you change or confirm
the size and type of stock.
NOTE: This feature may be
enabled/disabled by the System
Administrator.
Alternatively, you can change the paper
size and paper type by accessing the
Paper Tray Attributes screen from the
System Administrator Menu.
Your machine also alerts you if the High
Capacity Feeder is selected for a print job
where the stock selected does not match
the stock currently loaded.
It also warns you if the Feeder runs out of
stock during a job.
Paper
3-11