Xerox 700 User Manual page 188

Problem Solving
Code Cause/Remedy
Cause: Job was divided and printed due to insufficient disk space.
Remedy: Remove unnecessary data from the hard disk to increase
free disk space.
Cause: There is a problem with the document attached to the received
mail.
Remedy: Check the attached document.
Cause: The settings for stapling are canceled and prints the data.
Remedy: Confirm the staple position and try to print again.
Cause: A malfunction occurred in the machine.
Remedy: Power-cycle the machine. If the machine is not improved by
performing the relevant remedy, contact your Xerox Customer
Support Center.
Cause: The settings for punching are canceled.
Remedy: Confirm the punching position and try to print again.
Cause: The settings for folding are canceled.
Remedy: Confirm the folding settings and try to print again.
Cause: The number of pages exceeds the number of pages that can
be stapled.
Remedy: Decrease the number of pages, or cancel the stapling
settings, then try to print again.
Cause: A malfunction occurred in the machine.
Remedy: Power-cycle the machine. If the machine is not improved by
performing the relevant remedy, contact your Xerox Customer
Support Center.
8-38 Xerox 700 Digital Color Press User Guide