Warranty Registration; Troubleshooting - Allied Telesis AT FS708LE AT-FS708LE AT-FS708LE Installation Manual

Warranty Registration

When you finish installing the product, you
should register you product by completing the
enclosed warranty card and sending it in.

Troubleshooting

The following procedure should be perform
after you have initially installed the unit to
check to be sure that the device is operating
properly. You can also perform this procedure
to troubleshoot the unit in the event you
experience any problems with the device.
1. Check the PWR LED. The LED should be ON.
If the LED is OFF, check the following:
Verify that the power adapter is securely
connected to the power source and to the
DC connector on the front of the
AT-FS708LE unit.
Check to be sure that the power outlet has
power by connecting another device to it.
Try replacing the power adapter with
another power adapter.
2. Check the LNK/ACT LED for each port. The
LED should be lit steady or flashing. If a
LNK/ACT LED is OFF, check the following:
AT-FS708LE Installation Guide
31