Electrical Safety And Emission Statement - Allied Telesis AT FS708LE AT-FS708LE AT-FS708LE Installation Manual

Electrical Safety and Emission
Statement
Standards: This product meets the following standards.
U.S. Federal Communications Commission
DECLARATION OF CONFORMITY
Manufacture Name:
Manufacture Address:
Manufacture Telephone:
Declares that the product:
Model Number:
This product complies with FCC Part 15, Class B Limits:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device must not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
RADIATED ENERGY
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device pursuant to Part
15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with instructions, may cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on. The user is
encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the
receiver.
Allied Telesyn, Inc.
960 Stewart Drive, Suite B
Sunnyvale, CA 94086 USA
408-730-0950
Fast Ethernet Switch
AT-FS708LE Version 2
3