Field Replaceable Units; Power Supplies; Power Supplies And Fan Assemblies Locations - HP StorageWorks 2/32 - SAN Switch Installation Manual

Note:
specific speed during diagnostic testing.

Field Replaceable Units

You can replace the power supplies, fan assemblies, and motherboard in the field
without the use of special tools. The power supplies and fan assemblies are keyed
to ensure correct orientation during installation. Replacement instructions are
provided with all replacement units ordered.
Note:
switch, disconnect both power cords before servicing.

Power Supplies

The two power supplies are hot-swappable if replaced one at a time. They are
identical and fit into either power supply slot; see
1
2
3
Figure 18: Power supplies and fan assemblies locations
SAN Switch 2/32 Installation Guide
The transmit and receive speed of the links may be temporarily locked to a
The SAN Switch 2/32 uses two AC power cords. To remove all power from the
1
Power supply #2
Fan assembly containing
fans 5,6
Fan assembly containing fans 3,4
2 3
Fan assembly containing fans 1,2
4
Power supply #1
5
Managing the SAN Switch 2/32
Figure 18.
4 5
SHR-2580A
75