Connecting the SAN Switch 2/32 to the LAN
Use the following steps to connect the SAN Switch 2/32 to the Ethernet Local
Area Network (LAN) segment.
1. Remove the shipping plug from the SAN Switch 2/32 Ethernet port.
2. Connect one end of an Ethernet cable to the SAN Switch 2/32 Ethernet port;
Figure 14: Connecting the Ethernet cable
3. Connect the other end of the Ethernet cable to the workstation or to an
Note:
telnet or the Web Tools application. Verify that the switch is not accessed from any other
connections during the remaining steps.
4. Login to the switch with administrative privileges by telnet. The default
SAN Switch 2/32 Installation Guide
see
Figure
14.
Ethernet network containing the workstation.
You can now access the switch remotely (and from multiple connections), using
administrative logon is admin and the default password is password.
Installing the SAN Switch 2/32
SHR-2573A
51