Installing A Quickloop Using Web Tools - HP StorageWorks 2/16 - SAN Switch User Manual

Installing a QuickLoop Using Web Tools

If a Web Tools license is installed, you can install a QuickLoop as follows:
1. Launch a web browser, enter the switch name or IP address in the
2. Click the Admin button on the relevant switch panel. The logon window
3. Enter a logon name and password with administrative privileges and press
4. Select the License Admin tab.
5. Enter the license key in the License Key: field
6. Click Add button. The QuickLoop features are available as soon as the license
For more information about Web Tools installation, see the Web Tools User Guide,
Version 3.0.
Quickloop Fabric Assist User Guide
Location/Address section of the browser, and press <Enter>. Web Tools
launches, displaying the Fabric View.
displays.
Enter. The Administration View displays.
key is added.
Installing a QuickLoop
17