HP StorageWorks 2/16 - SAN Switch User Manual page 37

Preferred AL_PAs are added, within square brackets [ ], to the definition of a
domain, port, or WWN target. For example, a Fabric Assist zone defined with the
following members:
contains whatever devices are connected to switch 2, ports 12 and 14, and the
device with a WWN of "10:00:00:60:69:00:00:8a", and the node name
or port name in which the fabric is connected.
Quickloop Fabric Assist User Guide
Preferred AL_PAs are identified by using additional syntax, such as:
fazoneCreate "fazone_2", "H{1,4}; 1,1[0x88]; 1,5; 1,12[0xCC];
50:05:07:61:00:5b:50[0x08]; 50:05:07:61:00:5b:52;
50:05:07:61:00:5b:54"
"H{1,1};2,12[0xe2];2,14[0xe8]; 10:00:00:60:69:00:00:8a[0xef]"
The target connected to switch 2, port 12 is assigned an AL_PA values of
0xE2
The target connected to port switch 2, port 14 is assigned an AL_PA value of
0xE8
The AL_PA assigned to the target identified by the WWN is assigned a value
of 0xEF
Using QuickLoop Fabric Assist Mode
37