HP StorageWorks 2/16 - SAN Switch User Manual page 47

fazoneCreate
Create a Fabric Assist zone.
Synopsis
fazoneCreate "fazoneName","fazoneMemberList"
Availability
admin
Description
This command creates a new Fabric Assist zone. The variable "fazoneName" is
a name for the new Fabric Assist zone. The name cannot have been previously
used for any other Fabric Assist zone object. The variable
"fazoneMemberList" is a semi-colon separated list of one or more:
A Fabric Assist zone name is a C language-style name. It is a name beginning
with a letter and followed by any number of letters, digits and underscore
characters. Names are case sensitive, for example "faZone_1" and
"fazone_1" are different Fabric Assist zones. White space is ignored.
The Fabric Assist zone member list has at least one member (empty lists are not
allowed). The members are described by a semi-colon separated list of member
definitions. Physical fabric port numbers are specified as a pair of decimal
numbers "s,p" where "s" is the domain ID of the switch, and "p" is the port
number on that switch. For example, "2,12" specifies port 12 on switch domain
ID 2.
When a Fabric Assist zone member is specified by physical fabric port number,
then any and all devices connected to that port are in the Fabric Assist zone. If this
port is an arbitrated loop, then all devices on the loop are in the Fabric Assist zone.
Quickloop Fabric Assist User Guide
Physical fabric port numbers
WWNs
Fabric Assist zone alias names
Exactly one Fabric Assist host member
Fabric Assist Mode Telnet Commands
47