HP StorageWorks 2/16 - SAN Switch User Manual page 44

Fabric Assist Mode Telnet Commands
Table 1: Fabric Assist Mode Telnet Commands
Command
fazoneAdd
fazoneCreate
fazoneDelete
fazoneRemove
faShow
faStatsShow
44
Description
Adds member(s) to an existing Fabric
Assist mode zone.
Creates a Fabric Assist mode zone.
Deletes an existing Fabric Assist mode
zone.
Removes members from an existing Fabric
Assist mode zone.
Shows the port ID of each private Fabric
Assist mode host on the switch and the list
of each zoned target port ID on the fabric,
with its assigned phantom AL_PA value.
Displays a set of statistics for each Fabric
Assist mode host on the switch.
Go to
fazoneAdd on
page 45
fazoneCreate on
page 47
fazoneDelete on
page 51
fazoneRemove
on page 52
fazoneShow on
page 54
faStatsShow on
page 55
Quickloop Fabric Assist User Guide