Installing On A Windows Web Server; Installing On An Hp-Ux Web Server - HP Data Protector A.06.11 Integration Manual

NOTE:
If you have chosen this installation option, it is assumed that you have IIS with
TOMCAT running on Windows and Apache with TOMCAT running on HP-UX. You
are responsible for configuring the application server that hosts these servlets. The
servlets must be directly accessible via
port (http://hostname:8080/servlet).
This may mean that you must perform special configuration steps for your application
server and may need to restart both web server and application server. This is not
covered in the steps below. Refer to your application server and web server
documentation.

Installing on a Windows web server

1. Insert the Data Protector Windows installation DVD.
2. Change directory to HP_BTO_software_Integrations.
3.
Run DP-SIP-WIN_A.06.11.exe.
4. Follow the steps in the Setup Wizard, selecting SIP Servlet Only.
On the SIP portal machine, insert the Data Protector Windows installation DVD:
1. Change directory to HP_BTO_software_Integrations.
2. Run DP-SIP-WIN_A.06.11.exe.
3.
Follow the steps in the Setup Wizard, selecting the SIP Module Component
option.
4. Import the Customer Model, as described in
"Creating customer models and portal
5. Create users and user roles, as described in the SIP deployment and integration
guide.
6. Customize ConfigSpec.xml (see

Installing on an HP-UX web server

To install the integration on an HP-UX web server:
1. Insert the Data Protector HP-UX installation DVD.
http://hostname/servlet
views" on page 37.
"Editing
Integration guide for HP Service Information Portal
and not via a specified
ConfigSpec.xml" on page 33).
29