Installing a QuickLoop
This chapter provides the following information:
Installation Overview
Installation of aQuickLoop involves the installation of a license on each switch
that you want to enable for a QuickLoop. A license may have been installed on the
switch at the factory. If not, contact your switch supplier to obtain a license key.
QuickLoops require a Compaq StorageWorks Fibre Channel SAN Switch with
Fabric Operating System Version 3.0 or later installed. You can install a
QuickLoop license either through telnet or through Web Tools.
Quickloop Fabric Assist User Guide
Installation Overview on page 15
Installing a QuickLoop Using Telnet on page 16
Installing a QuickLoop Using Web Tools on page 17
2
15