Chapter 2, Using The Web Tools Interface; Chapter 6, Managing Ports; Chapter 11, Using The Fc-Fc Routing Service - Brocade Communications Systems SN3000B Documentation Update

14
Documentation updates for Fabric OS v7.0.1

Chapter 2, Using the Web Tools Interface

Under the heading "Working with Web Tools: recommendations" on page 29, replace the following
bullet.
Original:
•
Replacement:
•

Chapter 6, Managing Ports

Under the heading "Configuring FC ports" on page 79, add the following note.
NOTE
With Fabric OS v7.0.1, Web Tools supports interoperability between a Fabric OS fabric and a Brocade
Network OS fabric through an FC router. You can select this interoperability mode in the FC Port
Configuration Wizard.
Under the heading "Allowed port types" on page 81, update the following information to include
Brocade FC8-32E, Brocade FC8-48E, and Brocade 6505:
L_Ports are not supported on the Brocade FC16-32, Brocade FC16-48, or Brocade 6510.
Under the heading "Port activation" on page 86, add the following row to Table 9.
TABLE 9
Switch name
Brocade 6505

Chapter 11, Using the FC-FC Routing Service

Under the heading "Supported switches for Fibre Channel Routing" on page 146, update the
following information to include FC8-32E and FC8-48E:
Brocade DCX 8510-4 and DCX 8510-8, when configured with FC16-32 or FC16-48 blades.
Under the heading "FC-FC routing management" on page 147, add the following note:
NOTE
From Fabric OS v7.0.1, Integrated Routing (IR) license is not required to configure a port as EX_Port
with Brocade Native mode and Brocade NOS mode.
Under the heading "Opening the FC Routing module" on page 147, add the following bullet:
•
Un der the heading "Configuring an EX_Port" on page 149, add the following note.
38
A maximum of five simultaneous HTTP sessions to any one switch is recommended. An HTTP
session is considered a Fabric Manager or Web Tools connection to the switch.
A maximum of five simultaneous HTTP sessions to any one switch is recommended. An HTTP
session is considered a Brocade Network Advisor or Web Tools connection to the switch.
Ports enabled with POD licenses and DPOD feature
Enabled by default
0-11
Brocade DCX 8510-4 and DCX 8510-8, when configured with FC8-32E or FC8-48E blades.
Enabled with Ports on Demand
licenses
12-23
Enabled with the Dynamic Ports on
Demand feature
Not supported
Fabric OS Documentation Updates
53-1002165-05