Printing
Using a memory card or flash drive with the printer
Insert a memory card into the card slot or a flash drive into the USB port.
Inserting a memory card
Notes:
•
Insert the card with the brand name label facing up.
•
Make sure any arrows on the card point toward the printer.
•
If necessary, connect the memory card to the adapter that
came with it.
•
Make sure that the memory card inserted is supported by the
printer. For more information, see "Supported memory cards
and file types" on page 45.
•
The card reader light comes on when a memory card is inserted
and blinks when a memory card is being accessed.
Follow the instructions on the printer display or select from available options.
Notes:
•
If the printer does not recognize the memory device, then remove and reinsert it.
•
The printer reads only one memory device at a time.
Inserting a flash drive
Notes:
•
•
Warning—Potential Damage: Do not touch any cables, ports, any
network adapter, any connector, the memory device, or the printer in the
areas shown while actively printing, reading, or writing from the memory
device. A loss of data can occur.
The flash drive uses the same port that is used
for a PictBridge camera cable.
An adapter may be necessary if your flash drive
does not fit directly into the port.
46