Replacing Ink Cartridges - Lexmark Pro4000c User Manual

Ordering and replacing supplies

Replacing ink cartridges

Make sure you have a new ink cartridge or cartridges before you begin. You must install new cartridges immediately
after removing the old ones, or the ink remaining in the printhead nozzles may dry out.
1
Turn on your printer.
2
Open the ink cartridge access door.
Warning—Potential Damage: Do not extend the ink cartridge access door beyond 90 degrees when opening to
prevent it from breaking.
3
Press the release tab, and then remove the used ink cartridge or cartridges.
4
Install each ink cartridge.
Note: Install the new ink cartridges immediately after removing them from the packaging to avoid exposing the
ink to air.
5
Close the ink cartridge access door.
SD /M S/x
D/ MM
C
2
1
S D /M
S /x D
/M M C
14