Connectors And Port Pinouts; Figure 21. Rj-45 Connector And Port Pin Layout - Allied Telesis AT 8000/8POE Installation Manual

Connectors and Port Pinouts

This section lists the connectors and connector pinouts for the
AT-8000/8POE Fast Ethernet Switch and their components.
Figure 21 illustrates the pin layout for an RJ-45 connector and port.

Figure 21. RJ-45 Connector and Port Pin Layout

Table 7 lists the RJ-45 pin signals when a twisted pair port is operating in
the MDI configuration.
Table 7. MDI Pin Signals (10Base-T or 100Base-TX)
Table 8 lists the RJ-45 port pin signals when a twisted pair port is
operating in the MDI-X configuration.
Table 8. MDI-X Pin Signals (10Base-T or 100Base-TX)
Table 9 lists the RJ-45 connector pins and their signals when a
AT-8000/8POE Layer 2 Fast Ethernet Switch Installation Guide
8
8
1
1
Pin Signal
1 TX+
2 TX-
3 RX+
6 RX-
Pin Signal
1 RX+
2 RX-
3 TX+
6 TX-
55