Allied Telesis AT 8000/8POE Installation Manual page 21

Table 2. 10/100Base-T PoE Port LEDs (Continued)
LED State
Amber
Blinking
amber
Table 4 describes the Power LED.
LED State
Power Green
Table 4 describes the LEDs for the uplink ports.
LED State
LINK/ACT Off
Green
Blinking
Green
Amber
Blinking
Amber
AT-8000/8POE Layer 2 Fast Ethernet Switch Installation Guide
Description
A valid link has been established on the port
and the port is operating in 10Base-T mode.
The port is transmitting or receiving data at
10 Mbps.
Table 3. Power LED
Description
The switch is powered on and is operating
normally.
Table 4. Uplink Port LEDs
Description
The port has not established a link with an
end node.
A valid link has been established on the port
at 1000 Mbps.
The port is transmitting or receiving data at
1000 Mbps.
A valid link has been established on the port
at 10 or 100 Mbps.
The port is transmitting or receiving data at
10 or 100 Mbps.
21