Mounting The Display - Elo TouchSystems 1919L User Manual

Mounting the Display

Your medically certified touchscreen display conforms to the VESA Flat Panel Monitor
Physical Mounting Interface (FPMPMI) standard. The FPMPMI standard defines a physical
mounting interface for flat panel displays. Your display conforms to the corresponding
standards for flat panel display mounting devices, such as for walls and table arms. The VESA
mounting interface is located on the back of your touchscreen display and is pre-connected to
the pedestal.
1 Screw location, M4 Phillips, ×4
Note:
2-12
ET1919LM
ET1519LM
Figure 2-1 : VESA mounting interface location, pedestal removed
You will need a Phillips screwdriver to mount the display or remove the pedestal.
1
1
1
1