Outbound Filter - D-Link SharePort DIR-506L User Manual

Section 3 - Configuration
The Outbound Filter option is an advanced method of controlling data sent from the DIR-506L. With this feature you can configure
outbound data filtering rules that control data based on an IP address range. Outbound Filters can be used on outbound
packets. You must click Save Settings at the top to save the settings. Note this option is only available in Router mode.
Check the Enable box to allow outbound filtering rules.

Outbound Filter:

Use schedule Click the drop-down menu to select how you want the
rule: rule to be scheduled.
Outbound Filter This section will list any rules that are created. You may
click the Edit icon to change the settings or enable/
Rules List:
disable the rule, or click the Delete icon to remove the
rule.
Allow or Deny passage of addresses and ports that match
Allow/Deny all
to pass: the filter rules you set.
Source IP and Enter the source IP address and port. Enter 0.0.0.0 if you
Ports: do not want to specify an IP range.
Destination IP Enter the destination IP address and port. Enter 0.0.0.0 if
and Ports:
you do not want to specify an IP range.
Enable:
Check this box to enable the rule you are creating.
Schedule Rule #:
Provide an identification number for the rule.
Add New Rule: Click the Add button to apply your settings.
D-Link DIR-506L User Manual
Outbound Filter
51