Outbound Filter - D-Link DWR-111 User Manual

Table of Contents

Section 3 - Configuration

Outbound Filter enables you to control what packets are allowed to pass the router. Outbound filter applies on all outbound packets.

OUTBOUND FILTER SETTING

Outbound Filter:

Select this box to Enable the filter.

Use Schedule Rule:

You may select Always On or choose the number

of a schedule rule that you have defined.

Copy to ID:

Copies the predefined filter to the specified ID

OUTBOUND FILTER RULES LIST

ID:

Identifies the filter.

Source IP : Ports:

Specify the local IP address and then specify the

port after the colon.

Destination IP :

Specify the remote IP address and then the port

Ports:

after the colon.

Enable:

Select this box to enable the filter.

Schedule Rule #:

Specify the schedule rule number.

Go back to the previous filter page.

Advance to the next filter page.

Click Save Settings to save your changes, or click

Don't Save Settings to discard your changes.

D-Link DWR-111 User Manual

Outbound Filter

Table of Contents

Show Quick Links

Table of Contents