Outbound Filter - D-Link DIR-514 User Manual

Section 3 - Configuration
Outbound Filter enables you to control what packets are allowed to be sent out to the Internet. The outbound filter applies to all outbound packets.
After modifying any settings, click Save Settings to save your changes.
Outbound Select this box to enable outbound filtering.
Filter:
Use Schedule Select a schedule to use and copy to the specified rule ID when you
Rule: click Copy to. You may select Always On or use a specific schedule
that you have defined. To create and edit schedules, please refer to
"Schedules" on page 54.
ID: This identifies the rule.
Source IP : Specify the local IP address and then specify the port after the colon.
Ports:
Destination IP : Specify the remote IP address and then the port after the colon.
Ports:
Enable: Check the box to enable the specified rule.
Schedule Rule Specify the schedule rule number. Click on the Add New Rule button
#: to create a new schedule rule. To create and edit schedules, please
refer to "Schedules" on page 54.
Previous Page: Go back to the previous filter page.
Next Page: Advance to the next filter page.
D-Link DIR-514 User Manual

Outbound Filter

40