Wireless Security Settings; Security Settings - LevelOne WAB-6120 User Manual

LAN2LAN CPE
LAN2LAN CPE mode enables packet forwarding at layer 2 level. It is fully transparent for all the
Layer2 protocols.
Space in Meter
To decrease the chances of data retransmission at long distance, the LEVELONE 150MBPS
WIRELESS POE AP can automatically adjust proper ACK timeout value by specifying distance of
the two nodes.
Flow Control
It allows the administrator to specify the incoming and outgoing traffic limit by checking "Enable
Traffic Shaping". This is only available in Router mode.
Note:
We strongly recommend you leave most advanced settings at their defaults except
"Distance in Meters" adjusted the parameter for real distance; any modification on them
may negatively impact the performance of your wireless network.

Wireless Security Settings

To prevent unauthorized radios from accessing data transmitting over the connectivity, the LEVELONE
150MBPS WIRELESS POE AP provides you with rock solid security settings.

Security Settings

Open "Security Settings" in "Wireless" as below:
Chapter 4 Advanced Settings Page 34