Using The External Antenna - LevelOne WAB-6120 User Manual

Using the External Antenna

If you prefer to use the external antenna with N-type connector for your application instead of the
built-in directional antenna, please follow the steps below.
1. Grab the black rubber on the top of LEVELONE 150MBPS WIRELESS POE AP, and slightly pull
it up. The metal N-type connector will appear.
2. Connect your antenna with the N-type connector on the top of LEVELONE 150MBPS WIRELESS POE AP
Note:
If you are going to use an external antenna on LEVELONE 150MBPS WIRELESS
POE AP, get some cable in advance.
Be aware of the force you use while connecting to the N-type connector, inappropriate
force may damage the N-type connector!
Warning:
Users MUST power off the LEVELONE 150MBPS WIRELESS POE AP first before
connecting the external antenna to it. Do not switch from built-in antenna to the
external antenna from WEB management without physically attaching the external
antenna onto the LEVELONE 150MBPS WIRELESS POE AP; otherwise, damage
might be caused to the LEVELONE 150MBPS WIRELESS POE AP itself.
Chapter 2 Hardware Installation
Figure 11 Move the Rubber
Page 12