Site Survey - LevelOne WAB-6120 User Manual

Extension Channel Protection Mode
This is to avoid conflict with other wireless network and boost the ability of your device to catch all
802.11g transmissions. However, it may decrease wireless network performance. Compared to
CTS-Self; the transmission amount of CTS-RTS is much lower.
Enable MAC Clone
Available only under wireless client mode, it hides the MAC address of the AP while displays the
one of associated wireless client or the MAC address designated manually.

Site Survey

Under wireless client mode, the LEVELONE 150MBPS WIRELESS POE AP is able to perform site
survey, through which, information on the available access points will be detected.
Open "Basic Settings" in "Wireless", by clicking the "Site Survey" button beside "Wireless Mode"
option, the wireless site survey window will pop up with a list of available AP in the vicinity. Select the
AP you would like to connect and click "Selected" to establish connection.
Chapter 3 Basic Settings
Figure 26 Site Survey
Page 28