Backup/ Retrieve Settings - LevelOne WAB-6120 User Manual

Click "Browse" to select the firmware file you would like to load;
Click "Upload" to start the upload process;
Wait a moment, the system will reboot after successful upgrade.
Note:
Do NOT cut the power off during upgrade, otherwise the system may crash!

Backup/ Retrieve Settings

It is strongly recommended you back up configuration information in case of something unexpected. If
tragedy hits your device, you may have an access to restore the important files by the backup. All these
can be done by the local or remote computer.
Open "Configuration File" in "Management" as below:
Save Setting to File
By clicking "Save", a dialog box will pop up. Save it, then the configuration file ap.cfg will be
generated and saved to your local computer.
Load Settings from File
By clicking "Browse", a file selection menu will appear, select the file you want to load, like ap.cfg;
Click "Upload" to load the file. After automatically rebooting, new settings are applied.
Chapter 5 Management
Figure 21 Backup/Retrieve Settings
Page 44