Table of Contents
Advertisement
Pole Mounting
1.
Turn the LEVELONE 150MBPS WIRELESS POE AP over. Put the pole mounting ring through
the middle hole of it. Note that you should unlock the pole mounting ring with a screw driver
before putting it through LEVELONE 150MBPS WIRELESS POE AP as the following right
picture shows.
2.
Mount LEVELONE 150MBPS WIRELESS POE AP steadily to the pole by locking the pole
mounting ring tightly.
Chapter 2 Hardware Installation
Figure 8 Pole Mounting – Step 1
Figure 9 Pole Mounting – Step 2
Page 10
Advertisement
Chapters
Table of Contents
Troubleshooting
