Wap3205 V2 Modes; Chapter 2 Wap3205 V2 Modes; Overview; Device Modes - ZyXEL Communications WAP3205 User Manual

2.1 Overview

This chapter introduces the different modes available on your WAP3205 v2.
• Device mode. This is the operating mode of your WAP3205 v2, or simply how the WAP3205 v2
is being used in the network.

2.1.1 Device Modes

This refers to the operating mode of the WAP3205 v2, which can act as a:
• Access Point. Use this mode if you want to extend your network by allowing network devices to
connect to the WAP3205 v2 wirelessly. Go to
this mode.
In this mode, you can also set the WAP3205 v2 to work as an AP only, a wireless bridge to
establish wireless links with other APs (WDS bridge), or an AP and bridge simultaneously (WDS
repeater). See
• Client. Use this mode if there is an existing wireless router or access point in the network to
which you want to connect your local network. Go to
screen in this mode. In Client mode, you should know the SSID and wireless security details of
the access point to which you want to connect.
• Universal Repeater. In this mode, the WAP3205 v2 can be an access point and a wireless client
at the same time. Use this mode if there is an existing wireless router or access point in your
network and you also want to allow clients to connect to the WAP3205 v2 wirelessly. Go to
Section 4.5 on page 24
The following figure is a simple illustration of the device configuration modes of the WAP3205 v2.
WAP3205 v2 User's Guide
Section 10.12 on page 98
to view the Status screen in this mode.
C
H A PT ER

WAP3205 v2 Modes

Section 3.4 on page 18
for more information.
Section 4.5 on page 24
2
to view the Status screen in
to view the Status
15