Static Wep - ZyXEL Communications WAP3205 User Manual

Chapter 4 Client Mode
Table 8 Client Mode: Wireless LAN > Profile > Add (continued)
LABEL
Network Name
(SSID)
Security
Security Mode
Apply
Back
4.6.1.1 No Security
Use this screen if the access point to which you want to connect does not use encryption.
Figure 13 Client Mode: Wireless LAN > Profile: No Security
The following table describes the labels in this screen.
Table 9 Client Mode: Wireless LAN > Profile: No Security
LABEL
Wireless Setup
Profile Name
Network Name
(SSID)
Security
Security Mode
Apply
Back

4.6.1.2 Static WEP

Use this screen if the access point to which you want to connect to uses WEP security mode.
28
DESCRIPTION
Enter the name of the access point to which you are connecting.
Click the Site Survey button to go to the Site Survey screen to see available wireless
devices within transmission range.
Select the security mode of the access point to which you want to connect.
Click Apply to save your changes back to the WAP3205 v2.
Click Back to go back to the previous screen.
DESCRIPTION
Enter a descriptive name for this profile.
Enter the name of the access point to which you are connecting.
Click the Site Survey button to go to the Site Survey screen to see available wireless
devices within transmission range.
Select No Security in this field.
Click Apply to save your changes back to the WAP3205 v2.
Click Back to go back to the previous screen.
WAP3205 v2 User's Guide