Wlan Station Status - ZyXEL Communications WAP3205 User Manual

Figure 53 Summary: Packet Statistics
The following table describes the labels in this screen.
Table 28 Summary: Packet Statistics
LABEL
Port
Status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
System Up Time
Poll Interval(s)
Set Interval
Stop

9.5 WLAN Station Status

Click the WLAN Station Status (Details...) hyperlink in the Status screen or Monitor > WLAN
Station Status. View the wireless stations that are currently associated to the WAP3205 v2 in the
Association List. Association means that a wireless client (for example, your network or computer
with a wireless network card) has connected successfully to the AP (or wireless router) using the
same SSID, channel and security settings.
Note: This screen is not available when the WAP3205 v2 is in Client mode.
WAP3205 v2 User's Guide
DESCRIPTION
This is the WAP3205 v2's port type.
For the LAN ports, this displays the port speed or Down when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is enabled
and Down when the WLAN is disabled.
This is the number of transmitted packets on this port.
This is the number of received packets on this port.
This is the number of collisions on this port.
This displays the transmission speed in bytes per second on this port.
This displays the reception speed in bytes per second on this port.
This is the total time the WAP3205 v2 has been for each session.
This is the total time the WAP3205 v2 has been on.
Enter the time interval in seconds for refreshing statistics in this field.
Click this button to apply the new poll interval you entered in the Poll Interval(s)
field.
Click Stop to stop refreshing statistics.
Chapter 9 Monitor
81