Installing And Removing Dimms - Supermicro Supero X8DTU-F User Manual

Possible System Memory Allocation & Availability
System Device
Firmware Hub flash memory (System BIOS)
Local APIC
Area Reserved for the chipset
I/O APIC (4 Kbytes)
PCI Enumeration Area 1
PCI Express (256 MB)
PCI Enumeration Area 2 (if needed) -Aligned on
256-MB boundary-
VGA Memory
TSEG
Memory available for the OS & other applications
To Remove:
Use your thumbs to
gently push the re-
lease tabs near both
ends of the module.
This should release it
from the slot.

Installing and Removing DIMMs

X8DTU/-F
Rev. 2.01
To Install: Insert module vertically and press down until it
snaps into place. Pay attention to the alignment notch at
the bottom.
2-13
Chapter 2: Installation
Size Physical
Remaining (-Available)
(4 GB Total System Memory)
1 MB 3.99 GB
4 KB 3.99 GB
2 MB 3.99 GB
4 KB 3.99 GB
256 MB 3.76 GB
256 MB 3.51 GB
512 MB 3.01 GB
16 MB 2.85 GB
1 MB 2.84 GB
2.84 GB
Memory