2-5 Installing And Removing The Memory Modules; Installing & Removing Dimms; Removing Memory Modules - Supermicro P9DSU-C User Manual

Super
P9DSU-C Motherboard User's Manual

2-5 Installing and Removing the Memory Modules

Note: Check Supermicro's website for recommended memory modules.
Exercise extreme care when installing or removing DIMM modules to
Installing & Removing DIMMs
1. Insert the desired number of DIMMs into the memory slots, starting with
*
P1-DIMMA1. (For best performance, please use the memory modules of the
same type and speed in the same bank.)
2. Push the release tabs outwards on both ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the receptive point on the memory
slot.
4. Align the notches on both ends of the module against the receptive points on
the ends of the slot.
5. Use two thumbs together to press the notches on both ends of the module
straight down into the slot until the module snaps into place.
6. Press the release tabs to the locking positions to secure the DIMM module
into the slot.
Press both ends straight
down into the memory slot at
the same time.

Removing Memory Modules

Press the release tabs on both ends of the memory module to unlock it. Once it is
loosened, remove the DIMM module from the memory slot.
CAUTION
prevent any possible damage.
P9DSU-C
REV:1.10
2-12
Notches
Release Tabs