Front Control Panel
JF1 contains header pins for various buttons and indicators that are normally lo-
cated on a control panel at the front of the chassis. These connectors are designed
specifically for use with Supermicro server chassis. See the figure below for the
descriptions of the various control panel buttons and LED indicators. Refer to the
following section for descriptions and pin definitions.
JF1 Header Pins
X8DTU/-F
Rev. 2.01
FP PWR LED
HDD LED
NIC1 (Link) LED
NIC2 (Link) LED
Blue+(OH/Fan Fail/PWR
Fail/Blue_UID LED
PWR Fail LED
2-21
20
19
Ground
Key
Ground
Ground
2
1
Chapter 2: Installation
NMI
Key
3.3V
ID_UID/3.3V SB
NIC1 (Activity) LED
NIC2 (Activity) LED
Red+(Blue LED_
Cathode_UID)
3.3 V
Reset
Reset Button
Power Button
PWR