Stop Faxing; Setting Scanner Glass Size For Faxing; Color Fax Transmission; Canceling A Fax In Progress - Brother MFC-J4510DW Basic User's Manual

Chapter 4
f
When the Touchscreen asks you
Next page?, do one of the following:
 To send a single page, press No.
The machine starts sending the
document.
 To send more than one page, press
Yes and go to step g.
g
Place the next page on the scanner
glass.
Press OK.
The machine starts scanning the page.
(Repeat steps f and g for each
additional page.)

Stop faxing

To stop faxing, press
Setting scanner glass size for
faxing
When documents are A4 size, you need to
set the Scan Size to A4. If you do not, the
bottom portion of the faxes will be missing.
a
Load your document.
b
Do one of the following:
When Fax Preview is set to off, press

Fax.
 When Fax Preview is set to on, press
Fax and Sending Faxes.
c
Press Options.
d
Swipe up or down, or press a or b to
display Glass Scan Size.
e
Press Glass Scan Size.
f
Press A4 (or Letter).
g
Press OK.
h
Enter the fax number.
50
4
.
4
i
Press Fax Start.
NOTE
• You can save the setting you use most
often by setting it as the default setting.
(See Advanced User's Guide: Setting
your changes as the new default.)
• This setting is only available for sending
documents from the scanner glass.

Color fax transmission

Your machine can send a color fax to
machines that support this feature.
Color faxes cannot be stored in the machine's
memory. When you send a color fax, the
machine will send it in real time (even if
Real Time TX is set to Off).
a
Load your document.
b
Do one of the following:
 When Fax Preview is set to off, press
Fax.
 When Fax Preview is set to on, press
Fax and Sending Faxes.
c
Press Options.
d
Swipe up or down, or press a or b to
display Color Setting.
e
Press Color Setting.
f
Press Color.
g
Press OK.
h
Enter the fax number.
i
Press Fax Start.

Canceling a fax in progress

If you want to cancel a fax while the machine
is scanning, dialing or sending, press
4
4
.