Brother MFC-J4510DW Basic User's Manual page 119

Error Message
Disconnected
Document Cover Open
(MFC-J4710DW)
Document Jam/too Long The document was not inserted or fed
DR Mode in Use
High Temperature
Hub is Unusable.
Image Too Long
Image Too Small
Cause
The other person or other person's
fax machine stopped the call.
The document cover was open while
scanning a 2-sided document using
the ADF.
properly, or the document scanned
from the ADF was too long.
The machine is in Distinctive Ring
mode. You cannot change the
Receive Mode from Manual to
another mode.
The print head is too warm.
A hub or USB Flash memory drive
with hub has been connected to the
USB direct interface.
The proportions of your photo are
irregular so effects could not be
added.
The size of your photo is too small to
trim.
Troubleshooting
Action
Try to send or receive again.
If calls are stopped repeatedly and
you are using a VoIP (Voice over IP)
system, try changing the
Compatibility to Basic (for VoIP). (See
Telephone line interference / VoIP
on page 135.)
Close the document cover.
(See Using the ADF on page 45.)
(See Document jam on page 113.)
Set Distinctive Ring to Off. (See
Turning off Distinctive Ring
on page 64.)
Allow the machine to cool down.
Hubs, including USB Flash memory
drives that have a hub built in, are not
supported. Unplug the device from
the USB direct interface.
Choose a regularly proportioned
image.
Choose a larger image.
B
105